Category: Cell Phone Repair

You’ve probably heard at least once about the idea of formatting a phone’s battery. What battery formatting is about, how to do it, but especially if it still makes sense to do it when we are talking about last-generation smartphones, we will explain in this material.

When we talk about formatting the battery on the phone (because it could also be done on tablets, laptops or other devices) we mean a battery calibration.

To understand how battery calibration is done, you first need to know some basics about how a phone battery works.

Each battery has a chip, which sends a signal that will indicate the actual battery level of a phone at the time of the check. This information is automatically sent to your phone’s screen via your device’s processor.

The chemical element of the battery (lithium or nickel) is what “stores” the energy. I put this term in quotes because the current is not actually stored in the battery, but we will use this generally accepted term, although the process behind it is much more complex than that.

The chip tries to read how much of this energy the battery has accumulated. For the most accurate reading, the chip must “learn” the battery capacity. If the battery is fully discharged to 0% and then fully charged to 100% the chip will know what the capacity of the battery is.

The more you use a phone, the more its battery will drain and recharge at multiple points. This process will cause the chip to “miss” the exact reading of the energy left in the battery.

Formatting or recalibrating the battery would therefore represent a “reset” of how the chip and battery chemistry communicate.

How do you format a battery?

Formatting or calibrating the battery is a simple task. Regardless of which phone model we are talking about, formatting its battery will basically be a full charge cycle.

Let the phone reach 0% battery. Once the phone has shut down, restart it so that the device shuts down again. Without restarting it, put it on charge and let it reach 100%.

After the phone has fully recharged, you can disconnect the cable and restart the device. If the screen now shows a lower battery percentage, charge it again until it reaches 100% battery.

This full drain cycle followed by a full recharge will allow the chip that tells the processor what the battery value is to calibrate its readings in terms of the battery charge cycle.

Format iPhone battery

If your iPhone shows that the battery is far from empty, and then it shuts down out of the blue, you can try to format its battery.

Before starting the battery calibration process, you need to follow some steps to leave the battery with as few charges as possible.

* if you have set the low power consumption setting, cancel it; you can reactivate   it later;
* disable GPS (Settings - Privacy - Location Services), but do not forget to return to this setting after the iPhone battery formatting process is completed;
* reduce screen brightness (Settings - Display and brightness - swipe to the left);
* disable automatic updates (Settings - iTunes and App Store - turn off updates from the corresponding button).

Now your phone is ready to format its battery. Here are the steps you can take to do that:

Step 1 – let the phone fully discharge.

Step 2 – wait about three hours.

Step 3 – let it fully recharge, but don’t remove it from charging even after it reaches 100%. It is important to use an original charger.

Step 4 – wait for the phone to fully discharge again and let another three hours pass.

Step 5 – put it back on charge and leave it for a while after it reaches 100%.

Don’t forget to reactivate the services and functions you previously disabled. Normally, your iPhone battery should now be recalibrated.

Format Samsung battery

There are no big differences between a Samsung battery format and a battery recalibration in the case of an iPhone. Here is the process you should go through to format a Samsung battery:

Step 1 – use the phone until its battery “dies” completely.

Step 2 – Restart your phone and wait until it shuts down again.

Step 3 – repeat the above step a few times until the phone stops responding in any way.

Step 4 – connect the fully drained phone to an original charger and leave it until you see it has charged to 100%. Do not remove the charger, but leave it like that for a few hours.

Step 5 – resume normal use of your phone, which should now have its battery recalibrated.
Does the external battery need to be formatted?

The short answer to this question is NO, the external battery does not need to be formatted. Instead, if you want to extend its life, you can follow the tips below:

 do not leave the external battery in the sun or at extreme temperatures;
 when you recharge it, don't forget it with the cable connected;
 even if you don't use the external battery for a long time, remember to charge it at least half way.

Does formatting the battery still make sense on new phones?

Battery formatting is a holdover from older phone batteries that were based on nickel combined with cadmium.

Until a few years ago, our phones, as well as laptops, ran on nickel-based batteries. Things have evolved, and today we can enjoy devices with Lithium-ion (Li-ion) or Lithium-polymer (Li-po) batteries.

Any app or software that promises to improve your health or phone battery life will have no real value. In other words, these are just myths. A phone battery, once exhausted as a result of frequent use of the smartphone, i.e. repeated recharges, must be changed at some point. Of course, this operation can only be done in an authorized service center, you cannot change the battery yourself.

If your phone’s battery drains way too fast, even if you recharge it to 100%, either change it or get another phone.

Cell phone repair is not just a technical skill, but an art form that requires precision, creativity, and a deep understanding of the intricate components that make up modern devices. Restoring devices to their former glory presents unique challenges and triumphs, making cell phone repair a fascinating and rewarding craft. In this article, we will explore the craftsmanship behind cell phone restoration and highlight the skill and dedication involved in this specialized field.

Understanding the Complexities of Modern Devices:

Modern cell phones are marvels of engineering, with a multitude of components packed into a compact form factor. Repair technicians must have a comprehensive understanding of these components, as well as how they interact with one another, to diagnose and fix issues effectively. This knowledge requires constant learning and adaptation, as manufacturers continually introduce new technologies and designs.

Precision and Attention to Detail:

Cell phone repair requires exceptional precision and attention to detail, as technicians work with small, delicate parts and often tight spaces. A steady hand and fine motor skills are crucial, as even the slightest misstep can cause damage to sensitive components. Mastering this precision is a key aspect of the artistry involved in cell phone restoration.

Problem Solving and Creativity:

Each cell phone repair presents its unique challenges, requiring technicians to be resourceful and creative problem solvers. From finding innovative ways to access hard-to-reach components to developing custom tools or techniques for specific repair scenarios, the art of cell phone restoration demands a constant willingness to think outside the box.

Patience and Perseverance:

Repairing cell phones can be a time-consuming and intricate process, requiring patience and perseverance from technicians. In some cases, a single repair can take hours of meticulous work, testing the limits of even the most experienced professionals. The ability to remain focused and dedicated to the task at hand is a testament to the craftsmanship behind cell phone restoration.

The Triumph of Restoration:

One of the most rewarding aspects of cell phone repair is the satisfaction of restoring a device to its former glory. Whether it’s a simple screen replacement or a complex motherboard repair, the feeling of accomplishment that comes with successfully completing a challenging repair is a driving force for many technicians in the industry.

Preservation of Memories and Sentimental Value:

For many people, their cell phones hold significant sentimental value, containing precious memories in the form of photos, videos, and messages. By repairing and restoring these devices, technicians play a crucial role in preserving these memories and helping customers maintain their connection to the past.

The art of cell phone repair goes beyond technical skill, involving craftsmanship, creativity, and dedication to restoring devices to their full potential. Repair technicians face unique challenges and triumphs in their work, honing their precision, problem-solving abilities, and perseverance. Through their skill and expertise, these professionals not only bring new life to damaged devices but also help preserve the memories and sentimental value that these devices hold for their owners.

In our mobile-centric world, smartphones and tablets have become indispensable. As these devices grow more complex, so do the challenges of diagnosing and fixing issues. This comprehensive guide aims to provide a foundation for aspiring technicians seeking to excel in smartphone and tablet repair. We’ll delve into common problems, troubleshooting techniques, and necessary tools for success in this industry.

The Building Blocks of Mobile Devices:
    Gain a solid understanding of smartphones and tablets, including their hardware, software, and operating systems. Familiarize yourself with essential components like processors, memory, and displays.

Common Hurdles in Smartphone and Tablet Repair:
    Explore common issues encountered in mobile devices, such as cracked screens, battery problems, and software glitches. Understand the unique challenges each problem presents and the steps required to diagnose and address them.

Diagnostic Tools of the Trade:
    Discover various diagnostic tools and techniques utilized in mobile device repair, from multimeters to specialized software. Learn how to effectively troubleshoot issues and identify underlying problems.

Best Practices for Repair Procedures:
    Delve into industry best practices for repairing mobile devices, including proper handling, safety precautions, and efficient troubleshooting methods. Understand the importance of precision and care when working with delicate components.

Essential Toolkit for Mobile Device Repair:
    Examine the must-have tools for any mobile device technician, from basic screwdrivers to advanced equipment. Learn how to select high-quality tools that will stand up to daily use and enhance your efficiency.

Cultivating a Repair Skillset:
    Emphasize the importance of continuous learning and skill development in the rapidly evolving mobile technology landscape. Stay current with industry trends and advancements by participating in workshops, webinars, and online forums.

Certification and Training Opportunities:
    Investigate professional certifications and training courses available for mobile device repair technicians. Determine which programs align with your goals and will provide the knowledge and credibility needed for success in this field.

Launching a Mobile Device Repair Business:
    Consider the necessary steps to start a successful mobile device repair business, from market research to business registration and marketing strategies. Create a comprehensive business plan that outlines your objectives, target market, and financial projections.

Mastering the art of smartphone and tablet repair requires dedication, patience, and ongoing learning. By understanding the fundamentals of mobile devices, acquiring essential tools and skills, and pursuing professional development, technicians can excel in this dynamic and rewarding field. With perseverance and passion, you’ll be well on your way to becoming a mobile device master.

If you recently bought a used iPhone, you made a wise decision! We want you to know that not only your budget benefits in this situation, but also nature, which you indirectly chose to protect. Bringing used electronics back into the market goes a long way towards reducing pollution without compromising on quality, so you’ve done another good deed!

But we don’t want to tell you about the gratitude we bring you in this material, but about the notification you may have received on your phone and which, more than likely, made you think. More precisely, we are talking about “Important battery message”.

What does Important battery message mean?

If you’re holding a refurbished iPhone XR, XS, XS Max, 12, 13, 14 or any other model that was released after them and you’ve updated to iOS 15, it’s likely that the smartphone display the message Important battery message appeared.

No need to worry as your phone’s ability to function perfectly will not be affected in any way. On the contrary, if you receive this message, it means that the smartphone’s battery has recently been replaced with a new one, so that you can enjoy more autonomy.

A phone’s battery falls under the Consumables category, so it is among the first, if not the first, to lose its capacity. This happens because each individual user has his own habits of charging the phone, many of which are far from the recommendations of specialists (do not leave the phone on charge overnight, do not charge it more than 80%, do not -you let the battery drop below 20%).

That is why all smartphone manufacturers, i.e. Samsung, Huawei or others, do not offer a warranty of more than one year for phone batteries.

When necessary, the batteries of the phones are replaced with new ones, precisely so that the future owner of the device can enjoy a good autonomy, just as in the situation in which he would choose to buy you a new phone, from the store.

Why does the Important battery message appear on the screen?

The short answer to this question is because Apple wants to condition you to exchange your phone components with them, the alternative that costs more.

I mentioned above about the update to iOS 15, the newest Apple operating system, which comes bundled with this type of notifications. If you are not willing to pay the exorbitant costs that Apple authorized services impose and you choose another service for battery or display replacement, you are likely to receive this notification on your phone screen.

The problem, which was cataloged by many as an abuse on the part of Apple, is an older one, and worldwide it has triggered a movement called Right to repair (The right to repair). Both the US government and the European Parliament are now trying to regulate how Apple phones are used. Fans of the brand should have the right to repair iPhones wherever they want, that is, in the services they prefer, without being conditioned by messages like “Important battery message” to end up with the phones at Apple, where the costs of the services and spare parts are, we all know, much higher.

Is the Important battery message affecting my phone?

Not. Apple has made it clear that the “Important battery message” will NOT affect the performance of your iPhone. The notification is just to let you know that the newly installed battery on the device has not been attached to an Apple service, but this will have nothing to do with the life of the battery or its capabilities.

How long does the Important battery message stay on the screen?

The notification will remain on the screen of your phone for the first four days of using the device, then it will “move” to the settings area, next to the battery, where you can also see the battery capacity. It will stay there for 15 days, after which it will disappear completely.

As smartphone technology continues to advance, the cell phone repair industry must adapt and evolve to stay relevant and meet the changing needs of consumers. The rise of foldable devices, 5G networks, and advanced diagnostic tools are just a few examples of innovations that are reshaping the phone repair landscape. In this article, we will explore these emerging trends and discuss their implications for the future of the phone repair industry.

Foldable Devices: 

Foldable smartphones represent a significant shift in design and functionality, and as these devices become more popular, repair professionals will need to develop new techniques and skills to address their unique challenges. This may include specialized training in handling flexible displays and hinges, as well as access to replacement parts and components specifically designed for foldable devices.

5G Networks:

The widespread adoption of 5G networks will bring faster download and upload speeds, lower latency, and improved connectivity. While this advancement in network technology may not directly impact the phone repair industry, it does emphasize the importance of staying up-to-date with the latest smartphone models and their compatibility with 5G networks. Repair technicians will need to understand how to diagnose and resolve potential connectivity issues related to 5G technology.

Advanced Diagnostic Tools:

As smartphones become more complex, repair professionals must rely on advanced diagnostic tools to identify and resolve issues efficiently. From high-resolution thermal imaging cameras to sophisticated software for analyzing device performance, these tools will help technicians diagnose problems more accurately and streamline the repair process.

Modular Smartphone Designs:

Some smartphone manufacturers are exploring modular designs that allow users to easily swap out components, such as cameras, batteries, or processors. If this concept gains traction, it could lead to a shift in the repair industry, with technicians focusing on replacing individual modules rather than performing more complex repairs.

Sustainable Repair Practices:

As environmental concerns become increasingly important, the phone repair industry may need to adapt by embracing more sustainable repair practices. This could include using eco-friendly replacement parts, offering battery replacement services to extend device lifespan, and promoting device recycling programs.

Remote Support and Repair Services:

Advancements in remote support and diagnostic tools are enabling repair professionals to assist customers without the need for in-person visits. By leveraging these technologies, repair shops can offer more convenient and efficient services, helping customers resolve minor issues remotely and reducing the need for time-consuming in-store visits.

Specialized Repair Services:

As smartphone technology becomes more diverse and specialized, repair professionals may need to focus on specific niches within the market. This could include offering repair services for specific brands, models, or types of devices, such as foldable smartphones or devices with advanced AR/VR capabilities.

The future of phone repair will be shaped by emerging technologies and trends, requiring repair professionals to adapt and evolve to stay relevant in a rapidly changing industry. By embracing new techniques, tools, and specialized services, the phone repair industry can continue to meet the needs of consumers and ensure the longevity of their devices. As technology continues to advance, repair professionals must remain vigilant and proactive to maintain a competitive edge in an ever-evolving market.

Few situations are more frustrating than when your phone turns itself on and off. You’ve probably gone through the situation at least once when, in the middle of a conversation or any other activity you might do on your phone, the device froze and shut down suddenly or you had to restart it.

If your smartphone also shuts down, even if it has a battery, and then restarts itself, the information you will find in the following lines may be the solution to the problem you are facing.

Here’s what you can do if your phone restarts when you haven’t given it this command.

1. Update the phone’s operating system

Just as our laptops need to be up to date with the latest features and security patches to function properly, so too should our phones benefit from the latest operating system updates.

The number of updates you receive on your phone depends a lot on its manufacturer. For example, the latest Samsung phone models receive security updates every month. And, we know, sometimes they can get annoying. While you’re downloading the latest version of the operating system, you can’t use your smartphone, and that might not suit you.

But it is necessary to update, once the device has notified you that there is one available, in order not to risk not being able to use it anymore or for the phone to turn on and off, apparently for no reason.

You can see if your phone is running on the latest version of the operating system available for its model if:

 go to Settings;
 choose Software update;
 click on Download and install;
 check if the phone is up to date or if you have the Update option available.

What you want to find on the screen, to remove from the list of possible causes why the phone turns on and off by itself the reason that it is not up to date with updates, is the sentence Your software is up to date.

2. Update applications

Another reason why the phone shuts down, even if it has battery, could be that the installed applications do not have the latest update. If you chose to protect your smartphone’s battery and canceled the automatic download of the latest versions for the applications you use, you may have forgotten to check what updates appear on the store.

First, notice if it’s only when using certain apps that the phone freezes and shuts down. It is very possible that it is precisely an outdated version of an application that is now giving you headaches.

If you don’t notice any details like this, update all the apps downloaded on your phone to eliminate another possible cause of the phone turning on and off.

To do this:

 enter the Play Store;
 on the right, at the top, click on your picture or avatar;
 click on Manage apps & device;
 the number of applications for which there are updates will appear on the screen. You can choose either to switch to their new version, by clicking on Update all, or to see which applications it is about and delete the ones you no longer use, then update the ones you are interested in further.

After all the applications have finished updating, you can restart the phone and see if it still causes problems or not even after these steps.

3. Delete everything you no longer use from your phone

The phone also turns itself on and off if it has reached less than 10% of its maximum internal storage space. So, the third step you should take to get rid of this problem is to delete everything you no longer use from your phone.

Start with apps you haven’t opened in more than three months, if you haven’t already done so in the previous step. Continue with the printscreens you took with your phone, but didn’t look at, then move on to large and very large files. On the latter, which, we assume, are pictures and videos, you can choose either to delete them permanently, or to transfer them to the cloud or to a laptop or tablet.

Don’t forget the downloads folder either, where, most of the time, files that you don’t necessarily need anymore, but which take up space in the phone’s memory absolutely unnecessarily, remain forgotten.

Also go to Settings and check under Device which, Storage if not the phone has detected other files that “eat” from the storage space.

And if the internal memory of your smartphone is still not enough, even after all this “cleaning”, maybe you need an upgrade. Here are just some of the www.dalvado.com offers you can take advantage of when you’re looking for a phone with a large internal memory:

4. Check if your phone is overheating

One of the reasons why the phone shuts down, even if it has a battery, can also be its overheating. As a protective measure, the device will restart itself or remain shut down.

Also on our blog you will find a material in which we explained in detail why your phone overheats and how to solve this problem.

Also, even at low temperatures the phone can shut down for no reason, also as a form of self-protection. As soon as you store it in a warmer environment, you will notice that the device will recover. It is good, however, to avoid exposing it to extreme temperatures, especially if you intend to use it for a long period of time after purchase.

5. Factory reset the phone

If nothing you’ve tried so far has worked and your phone keeps turning on and off as it pleases, it’s time to play your last card – a factory reset.

Do not forget to make a full backup before the reset, so as not to lose data, conversations or files important to you.

Factory reset differs from phone to phone, but generally the steps you’ll need to follow to do this are:

 go to Settings;
 look for General management;
 choose Reset;
 press Factory data reset;
 click on the Reset button to confirm the operation.

If you have followed all the steps explained above, the phone should not restart itself. Now you can enjoy a smartphone that no longer turns on and off by itself!

 However, do not forget these tips and apply them in the future:

     always update the phone applications;
     keep the phone's operating system at the latest available version;
     delete large files and folders of screenshots and downloads or transfer them to    the cloud or another device.

The heating of the mobile phone is normal, but when its temperature exceeds a certain limit, it can be a cause for concern because it can turn into overheating. In order for the phone to work, it is necessary to produce movement and, implicitly, energy, which also leads to the release of heat.

Heating and, implicitly, overheating of the phone can be effects of the action of various elements of the phone.

Processor

The processor is the element that consumes the most energy and, for this reason, also the one that dissipates the greatest amount of heat. You probably noticed that when you use your phone for games or to access more demanding sites, it tends to warm up. This is because the processor is forced to consume more power during these actions.

Battery

After a longer period of use, the battery — consisting of several lithium batteries — wears out. Using the phone involves periodically discharging and charging the battery and, through this process, heat is released. It’s possible that your phone is warming up for this reason.

Camera

The camera is one of the most important elements of the mobile phone, because posting spectacular photos on social networks has become a phenomenon that millions of people around the world take part. It is precisely for this reason that a camera with a high resolution is among the wishes of mobile phone users. However, the higher the resolution of the camera, the more energy it consumes and can cause faster heating of the phone.

Screen

Some phones have automatic adjustment of the screen light according to the light level in the environment in which they are used, but not all of them offer this possibility. In addition, there are users who like to interact with a very bright screen, in which the colors are more vivid. Those who keep the phone screen set at maximum brightness should know that this means consuming more energy and dissipation of more heat.

What are the reasons for overheating the phone

Overheating of the phone is most often related to chip overload, which can be caused by many factors.

Usage level

If you use your mobile phone to do several things at once — you send messages while a song is playing on YouTube and you want to take a picture in this interval, for example — your phone might overheat. The pressure put on the cell phone elements favors the increase in temperature and thus the phone can overheat.

Using your phone while charging

It can be hard to stay away from your mobile phone, but you better try to do this at least when you leave it to charge. Otherwise, especially if you use demanding applications while your phone is charging, you may feel its temperature rising quite a lot. This can also be caused by using an inappropriate charger for your mobile phone type.

Applications

If you have many applications installed in your phone, even if you don’t actively use them, the chances of your device overheating are higher. Complex games and large applications require the mobile phone’s processor the most, resulting in its excessive heating.

Phone settings

Mobile data turned on, Wi-Fi on, or Bluetooth make your phone battery discharge faster, and when you use it, it may result in an increase in temperature. Also, the acceleration of the heating process can be determined by the bright brightness of the screen, if you have it so set.

In addition, depending on the area where your phone has a temperature higher than normal, you can figure out what might be causing overheating:

If the temperature is too high in the back of the phone, in the case area, the problem may be in the battery. If this happens frequently, you will most likely need to replace the battery with a new one;
If overheating affects the lower part of the phone, where the charging port is located, the charger may cause the problem. Try to use another charger, preferably an original one;
If the screen or speaker area overheats, it is best to go with the phone to a service because other phone problems may have caused the temperature to rise.

No gadget is spared from the danger of damage, but when you drop a phone in the water, you risk losing the information in it, not just crashing the device. Although, at first glance, a wet phone is compromised, you have plenty of chances to continue using it. All you have to do if you dropped your phone in the water is just to remember a few precautions in advance and act promptly.

What are the steps to follow right after watering your phone
What you should not do after the incident
Practical tips to help prevent your phone from getting wet
What other tips can you consider

What are the steps to follow right after watering your phone

Depending on the severity of the incident and the possibility that you currently have of recovering the device, here’s how to act:

• shut down the phone;
• remove the cover of the device quickly;
• remove the gadget’s battery, if the model allows it;
• wipe the phone with a fabric as absorbent as possible;
• quickly look for a cotton towel and wrap the phone in it;
• use the vacuum cleaner to remove water from the inside of the appliance;
• put the phone in a container and pour plenty of rice on it.

What you should not do after the incident

Although panic is a very justified feeling, when such a valuable object is endangered, you should master your momentum and act effectively.

• does not open the mobile phone to check if it still works;
• do not shake the device, to avoid the spread of water inside;
• do not use the hair dryer to dry the phone and do not place the device on warm surfaces.

Practical tips to help prevent your phone from getting wet

More than how you save your phone from destruction it matters to know how you can protect yourself from problems from the very beginning. An underwater pouch can save you from the effects of water on the internal circuits of the gadget, and a popsocket completes the protection package with a solution against impact on hard surfaces. For even more safety, choose a waterproof and shockproof phone, an option offered by more and more manufacturers.

What other tips can you consider

In the first phase, damage to the circuits in the phone is the only danger that can remove your gadget from the circuit. However, there are other risks to which the device may be exposed, depending on the temperature and nature of the liquid that has penetrated it. The danger of a short circuit is most important, but it is enough that only the volume or unlock buttons are affected to make the phone unusable. Depending on the circumstances, your incident could be attributed to lack of caution, which could cause you problems in benefiting from the warranty for your smartphone or tablet. If you are preparing to buy a phone from a gsm operator, you can study the option of making insurance for your gadget.

You’ve got your phone glass broken?

Check your phone insurance (if you have one)

The next important step you need to take is to check if the insurance of your phone, if you have one, also includes replacing the broken screen.

Usually this does not happen and this is because breaking the screen is considered to be a thermal shock, and most smartphone manufacturers do not foresee this repair cost in the warranty agreement.

But if the cost value is covered by the warranty of the device, read carefully under what conditions this is done. Most likely, the process is not fully covered by your insurer, but you are certainly covered a large part of your costs. Yes, this does not save you from taking money out of your pocket, but you will be able to come out much cheaper compared to a full cost of repairing that component.

You can go directly to one of the service services authorized by the company that produced the phone or other authorized services. However, for devices purchased at subscription, any damage your phone suffers should only be brokered through your insurer.

As a rule, depending on the case, you will have to pay a fee. But depending on the situation you are in, it wouldn’t hurt to make a phone call to your mobile operator to find out all the information you need in this respect.

Use a backup phone

Subsequently, after you have left your device to the specialists who will repair it, make sure that you have already prepared a backup phone that you will use for a few days, until you return to the other one.

In the following, we will discuss extensively what damage your mobile phone may suffer. Here’s what you need to do if you dropped your phone on the floor.

Accept the situation calmly

If the phone just fell out of your hand, it’s best to calm down first and accept what happened to you. Concentrate your energy and resources to find solutions. There are no things that can’t be solved, especially if we’re talking about cell phones. Plus, the fact is already consumed, and you can just get used to the idea and solve the problem.

Data recovery from a phone with a broken screen

A very big fear when you break your phone is connected to the fact that you do not know what will happen to your phone data. If you have a memory card, chances are that your files are already saved on that card. To transfer data from your phone, on a laptop or PC it is necessary to have a USB cable with which you will connect to a USB port of your computer.

Most of the time, cloud storage of data can save you. So check if you activated a cloud storage service, or what was the last time a data backup was made for this phone. This can save you in other situations such as: defective, lost or stolen phone. In the unfortunate case you didn’t do this, we advise you to do it for the next phone calls. For Apple devices, cloud storage starts at 1 usd per month for extra 50GB of memory, while cloud storage for Android devices is free in Google Drive and Google Photos for a few tens of GB. All you have to do is enable back-up in the cloud in your phone settings.

An incident like dropping your phone on tiles or cement leaves you with a bitter taste. In all the madness created by this episode, there is a pretty good chance that at some point you will confuse a broken LCD screen and a broken glass. The LCD screen is directly responsible for the display function of the phone, as well as for the touchscreen.

As for the glass screen, it is played only by the outer layer of the phone, which, although it is designed to be durable, can be the first affected in the event of a strong fall from height.

Most of the time, the damage to the screen in the glass is visible enough to realize that the touch component is not touched. However, there are situations where the glass screen can remain intact, and the damage actually occurred on the display. In this case, the repair will be a larger one and will cost you more.

If you dropped your phone on the floor and it doesn’t turn on anymore, it’s best to go to an authorized service and leave your smartphone to the specialists. They will draw up a service sheet, note the unique IMEI identification of the phone and start operations to “save” your phone, so you can enjoy it again as quickly as possible.

Another important point is that you should pay more attention to water resistance after you break your phone, as it may be lost.

Difference between display, screen and glass

To begin with, to better understand what is wrong with your phone, it’s best to know that the screen of a smartphone consists of three essential components:

Display (component that allows the display)
Touchscreen (touch component)
Glass glazing

It’s good to know that if the glass window deteriorates, there is no need to replace all three components. This leads to a significant reduction in costs if we were to balance the money allocated in case of repairing a display or touchscreen.